Attics often have place that goes to squander even when the attic is finished and a household member utilizes it as a bedroom. Because they have to accommodate roof rafters, finished attics usually include knee walls, little partitions about four toes large, into their style. The area driving the knee wall often goes unused. A developed-in chest of drawers, nonetheless, can take advantage of this empty place and give the occupant far more room for her other furniture or belongings.
Eliminate the drawers from the desk you want to established into the developed-in compartment.
Lower off any wood that overhangs the front and sides of the desk with a handsaw.
Flip the upper body on its facet. Use the handsaw to trim any feet or other extensions from the base of the chest.
Coat the upper body with a varnish or stain, if the chest is not completed. Utilize the stain, which will support safeguard the chest from humid conditions in the attic, with a paintbrush.
Measure and mark down the length and width of the desk. Mark the dimensions on the knee wall with the pencil.
Cut together the wall outline with a drywall noticed. Remove the drywall.
Use a hammer to knock out any studs that block the opening.
Minimize two 2-by-4s the same depth as the chest to use as support braces. Nail them to a piece of two-by-4 vertical blocking. Nail the two related items to a horizontal 2-by-4 foundation to total the braces. Set the braces towards the back again of the wall. Screw them into the floor and wall with a drill.
Location the chest in the opening. Thrust it back right up until the entrance of the chest is flush from the opening. Screw to the sides and top and base of the opening. Replace the drawers.
Tidak ada komentar:
Posting Komentar